Alloy RD1

770: RedBird Alloy RD1 Review Cont’d

| Tom Tsui

After received my second RD1 unit, I immediately swapped it with the first one being used in my main system.  Assuming it could run directly straight out from the box.  Sadly, no, it didn’t.–

NO TWO RD1 ARE THE SAME

Truly, the joystick axes for the rudders and brakes are the same.  But the new RD1 performed far from normal using the calibration from the first RD1.
RD1-2GIF
The Rudder Axis wasn’t centered at rest.  And the left and right Brake Axes were jumping up and down and didn’t return to zero when released, meaning that the toe brakes were somehow pressed all the time.

Obviously, the two RD1s are two individual equipment and they couldn’t be treated as the same unit.  Initial calibration for each individual RD1, therefore, was mandatory and inescapable. Continue reading →

769: My RD1 Rudder Now Fly in pairS

| Tom Tsui

Truly, the Thrustmaster Pendular Rudder (TPR) performs nicely in my second system.  But I found it more and more alienated when the Redbird Alloy RD1 has become my primary rudder and be used everyday in the last six months.

Consequently, I couldn’t help having two RD1s flying in pairs.
RD1_Extra_01S
Thanks goodness! Continue reading →

763: RedBird Alloy RD1 Review Part 2

| Tom Tsui

…continued from Part 1

–

SettingS in MSFS

Since Redbird isn’t an affliated partner with Asobo, users have to configure the Alloy RD1 in MSFS by themselves.  The assignment process can’t be said complicated.  But it was not straightforward either.

Also, the MSFS setting information RD1_30provided by the company is NOT fully CORRECT.   For example, in the mapping suggestion, Redbird states that the Right Brake Axis doesn’t need to be Reversed.

But it is incorrect as I have to enable the REVERSE to use the Right Brake properly. Continue reading →

762: RedBird Alloy RD1 Review Part 1

| Tom Tsui

Before the story, I would like to say that the Redbird Alloy RD1 is the best in the six rudder pedals* (see the list at the end of the story) I’ve ever used in my two decades’ flight simulation experience.
RD1_01S
To be honest, the purchase of this Alloy RD1 rudder pedals was unintended.  My original plan was to get another Thrustmaster Pendular Rudder TPR to replace my over 10-years old Saitek Cessna Pedals.

But unfortunately or fortunately, there were no stock from all vendors at that time (July 2021) and none of them could confirm whether new stock would arrive by end of the year.

Since I had already decided to take a bold step to get the Alloy TH1 at that time, I persuaded myself to go further to get the Alloy RD1 as well.

Frankly, its price tag, $549 (now $599) plus over $100 shipping, wasn’t attractive, nor does its appearance (the retro-looking isn’t my favorite).  I really was a bit hesitated when I placed my order.

Thank goodness, since I started using the rudders six months ago, I am fully impressed by its performance.  And in my opinion, it even out-performs the Thrustmaster TPR I am having on my other setup and the VirtualFly Ruddo I used before.

Following is my review : Continue reading →